Shuttle met à jour son catalogue de Mini-PC avec le passage en douceur vers la dernière génération de processeur Intel alias Skylake. Le XPC XH170V est annoncé.
Ce Mini-PC d’un volume d’un peu plus de trois litres est un barebone. Il offre les bases pour se monter une configuration Intel sous processeur Core de sixième génération, alias Skylake. Il embarque une carte mère au chipset H170 et socket LGA 1151 (FH170V, Mini-ITX). Son architecture prend en charge un SSD M.2, deux disques durs 2,5 pouces et un lecteur slimline. Le châssis est en acier tandis que la finition propose du noir laqué.
Shuttle opte pour une stratégie d’évolution en douceur en limitant les investissements puisque si Skylake est annoncé avec un contrôleur mémoire DDR4, le XPC XH170 s’appuie de son coite sur l’usage de DDR3L-1333/1600 (PC3-10600/12800) avec un maximum de 16 Go au travers de deux slots. A cela s’ajoute un emplacement MiniPCIe 2.0 x1, trois connecteurs SATA 6 Gb/s ainsi que quatre ports USB 2.0, quatre ports USB 3.0, des ports eSATA, RS-232 et Gigabit Ethernet. Du coté vidéo nous avons deux sorties DisplayPort 1.2 et un HDMI 1.4.
L’engin peut être utilisé à l’horizontale ou à la verticale. Il se présente avec des dimensions de 40 x 200 x 72 mm pour un poids de 2,2 kilogrammes. Il s’accompagne d’une alimentation et d’un système de refroidissement pour le processeur.
Il y a à ce sujet une restriction puisque la puce Skylake ne devra pas dépasser un TDP de 65 Watts, impossible donc de profiter d’un Core i7-6700K. Enfin le bundle s’accompagne d’une alimentation externe de 90 Watts.
Le prix de vente conseillé du barebone XH170V est de 269 euros. La disponibilité est immédiate.
Voici en détail, l’ensemble de ses caractériels en particulier
- Chassis
Slim 3-litre chassis, colour: black
Dimensions: 240 x 200 x 72 mm (LWH) = 3.5-litre
Weight: 2.2 kg net, 3.5 kg gross
Covers for optical drive and front panel connectors
Hole for Kensington Lock at the back panel
Operation position horizontal or even vertical with the optional stand PS01 - Storage Bays
This system features three drive bays:
1) supports one optical drive (ODD) in 5.25″ slimline format with max. 12.7 mm height – this bay can alternatively be used for a 2.5″ drive
2) upper 2.5″ bay supports one 2.5″ drive with max. 12.7 mm height
3) lower 2.5″ bay supports one 2.5″ drive with max. 9.5 mm height
The system includes the following pre-installed cables:
– 2x Power cables for 2.5″ drives (5 Volt [9])
– 1x SATA cable for one 2.5″ drive
– 1x combo connector (SATA and power) for an optical slimline drive (DVD or Bluray)
Important note: This system is ready for one 2.5″ drive (SSD or hard disk) and one DVD/Blu-ray drive in slimline format to be installed.
For further 2.5″ drives, additional SATA cables and screws are required. For a possible third 2.5″ drive also a Y power cable is required. (All not included) - Operation System
This system comes without operating system.
It is compatible with Windows 7 / 8.1 / 10 and Linux – 64 bit. - Mainboard / Chipset / BIOS
Mainboard FH170V, Mini-ITX form factor 17 x 17 cm, 8 layer design
Chipset: Intel® H170 Chipset
(Intel® DH82H170 PCH, Codename “Sunrise Point”)
AMI BIOS in 8 Mbit EEPROM with SPI interface
All capacitors are high quality solid capacitors
Supports hardware monitoring and watch dog functionality
Supports Unified Extensible Firmware Interface (UEFI)
Supports power on after power failure [1] - Power Adapter
External 90 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz
Output: 19 V DC, max. 4.74 A, max. 90 W output wattage
AC Connector with protective-earth contacts, cable length: 1.7m
DC Connector: 5.5 / 2.5mm (outer/inner diameter) - Processor support
Socket LGA 1151 (H4) supports the sixth generation of
Intel Core i7 / i5 / i3, Pentium and Celeron processors
Maximum supported processor power consumption (TDP) = 65W
Codename “Skylake”, 14nm process technology, up to 8 MB of L3 cache
Not compatible with older Socket LGA 1150 processors.
Does not support the unlock-function of Intel K-Series processors.
The processor integrates PCI-Express, memory controller and the graphics engine on the same die (performance features depending on processor type)
Please refer to the support list for detailed processor support information at global.shuttle.com. - Processor heat-pipe cooling
Processor cooling with heat-pipe technology and two fans (6cm) - Memory support
2x SO-DIMM slots with 204 pins
Supports DDR3L-1333/1600 (PC3-10600/12800) SDRAM at 1.35V
Supports Dual Channel mode
Supports max. 8 GB per DIMM, maximum total size of 16 GB
Supports two unbuffered DIMM modules (no ECC)
Notice: This mainboard does only support 1.35V DDR3L memory modules.
Note: DDR3L has a lower operation voltage compared to DDR3 - Integrated Graphics
The features of the integrated graphics function
depend on the processor type used.
Three digital video outputs: 2x DisplayPort 1.2 and 1x HDMI 1.4
– supports three independent displays simultaneously [3] – supports Full HD resolution at 1920×1200 (1080p/60Hz)
– supports 4K Ultra HD resolution at 3840 x 2160 via DisplayPorts (2160p/60Hz) and HDMI (2160p/30Hz) [5] – supports Blu-ray (BD) playback with HDCP
– supports HD video plus multi-channel digital audio via a single cable. - 5.1-channel audio
Audio Realtek® ALC 662 5.1-channel High-Definition Audio
Three analog audio connectors (3.5mm) at the back panel:
1) Front line-out (head-phone)
2) Rear Surround line-out (shared with microphone input)
3) Center line-out (shared with line-in)
Digital audio output is provided by HDMI and DisplayPort - Gigabit LAN Controller
Intel i219LM PHY connected to the MAC of the processor
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE) - M.2 Slot
The M.2 2280 type M slot provides the following interfaces:
– SATA v3.0 (6 Gbps)
– USB 2.0
It supports M.2 cards with a width of 22 mm
and a length of 30, 42, 60 or 80 mm (type 2230, 2242, 2260, 2280).
It supports M.2 SATA SSDs and other M.2 cards, but no M.2 PCIe SSDs. - Mini PCIe Slot
Mini-PCIe Half-Size slot
with PCIe 2.0 and USB 2.0 interface
supports one optional Wireless Network (WLAN) card - Drive connectors
3x Serial-ATA connector, max. 6 Gbps
1x external Serial-ATA (eSATA), max. 3 Gbps
1x M.2 SSD (M.2 slot)
Supports RAID 0, RAID 1
Supports Intel® Rapid Storage Technology 13 (RST)
Supports NCQ, AHCI and Hot Plug
Note: The package includes pre-installed cables (for SATA and power) and mounting screws for one 2.5″ drive and one for one optical slimline drive. - Front Panel connectors
Microphone input
Audio Line-out (headphone)
2x USB 3.0
2x USB 2.0
Power button
Power LED (blue)
HDD LED (yellow) - Back Panel connectors
2x DisplayPort 1.2 audio/video output [2] HDMI 1.4 audio/video output
2x USB 3.0
2x USB 2.0
GigaBit LAN (RJ45)
RS232 serial port
External Serial ATA (eSATA 3G)
Audio Line-in
Audio Line-out
Audio Mic-in
Clear CMOS Button
Perforation for Wireless LAN antennas (2 holes)
Hole for Kensington Lock - Other onboard connectors
Power on after power fail (hardware solution, Jumper 4) [1] Front connectors for power button, LEDs, USBs, audio ports
Three headers 2×5-pin for dual USB 2.0 (one occupied)
Two 4-pin fan connector (one occupied by the CPU cooling system)
LPC interface (2×10-pin header, 2 mm pitch) - Supplied Accessories
Multi-language installation guide (EN, DE, FR, ES, JP, KR, SC, TC)
Driver DVD
Pre-installed SATA and power cables for one 2.5″ drive and one slimline drive
External power adapter with 1.7m AC power cord (with protective-earth contacts)
Protector cap for the CPU socket (do not use if heat-pipe or fan is mounted)
CPU heatpipe cooling system with heatsink compound
Bag with screws - Optional Accessory
(1) Vertical stand (PS01)
(2) VESA mount (PV02)
(3) WLAN module (WLN-S) [4] (4) Cover for slimline drive bay [6] (5) 3.5″ Hard Disk Rack (PHD4) [8] - Environmental Specifications
Operating temperature range: 0~50°C [7] Relative humidity range: 10~90% (non-condensing) - Conformity and Certifications
EMI: FCC, CE, BSMI, C-Tick
Safety: CB, BSMI, ETL
Others: RoHS, Energy Star V5.0, EuP Lot 6
This device is classed as a technical information
equipment (ITE) in class B and is intended for use in
living room and office. The CE-mark approves the
conformity by the EU-guidelines:
– EMV-guideline 89/336/EWG electromagnetic tolerance
– LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits
